 | ¡¡ |
| ¡¡
Stainless
steel cut wire shot is ideal shot blasting and shot peening metal
material which is also called stainless steel cut wire shot
abrasive, stainless steel shot, blasting abrasive, shot blasting
abrasive, blasting material, shot blasting scale-removal abrasive,
peening abrasive, grit peening abrasive, grit peening machine
abrasive, shot peening scale-removal abrasive, shot peening material,
grit peening material, grit peening consumable, scale-removal
abrasive, steel plate preparation abrasive, steel preparation
abrasive.
Stainless steel cut wire shot is widely used in shot blasting
machine, shot blasting equipment, shot peening machine, shot peening
equipment, grit peening machine, steel plate preparation production
line, steel structure preparation line.
|
stainless steel cut wire shot cleaning |
Shot blasting cleaning, shot peening cleaning, coloured
aluminum alloy, copper alloy, zinc alloy die-casting parts,
stainless steel casting parts cleaning, stainless steel
forging parts cleaning, shot peening of forged parts,
stainless steel plate cleaning, stainless steel cleaning,
coloured parts, etc. deburring and lighting of surface, can
enhance the anti-fatigue performance, anticorrosion,
concealing surface defects of work pieces to enable it to be
bright and white. |
|
stainless steel cut wire shot removing rust |
Shot blasting rust-removal, shot peening rust-removal casting
parts rust-removal, forged parts and steel plate
rust-removal, H-beam steel rust-removal, steel structure
rust-removal |
|
stainless steel cut wire shot intensifying |
Shot blasting intensifying of stainless steel parts and heat
treatment parts |
|
stainless steel cut wire shot shot peening |
Shot peening of Coloured aluminum, copper, magnesium
die-casting and stainless steel |
We strictly abide by standard of Japan JIS to
manufacture.
¡¡ ¡¡
Stainless steel cut wire shot technique
specification |
|
product |
Stainless
steel cut wire shot |
|
C |
¡Ü0.12% |
|
Mn |
¡Ü2.00% |
|
Chemical composition |
Si |
¡Ü1.00% |
|
Cr |
17¡«19% |
|
Ni |
7¡«10% |
|
S |
|
|
P |
¡Ü0.035% |
|
Average hardness (measured under 500g load) |
41¡«49HRC(388¡«509HV) |
|
Hardness deviation |
The maximum deviation is¡À1.0HRC or ¡À40HV |
|
Microstructure |
portrait ( deformed Austenitic) Landscape
orientatio deformed Austenitic |
|
minimum density (determined alcohol displacement) |
7.8g/cm3 | |
|
| |
products:steel shot¡¢steel grit¡¢Cut wire shot¡¢Stainless cut wire shot |
|
