|
 |
Steel cut wire is used for blast cleaning of
shot blasting machine, steel pre-treatment, steel structure.
Blast
cleaning of Steel cut wire
|
Used for blast cleaning of casting, die-casting, forging,sand removal of
casting, steel plate, H type steel, steel structure. |
Rust removal of Steel cut wire |
Rust removal of casting, forging, steel plate, Htype
steel, steel structure, descaling of forging |
Shot peening of Steel cut wire |
Shot
peening of gear, heat treatment. |
Shot blasting of Steel cut wire |
Shot blasting of profile steel, ship board, steel board,
steel material. |
Shot blasting of Steel cut wire |
Shot blasting of steel board, profile steel, steel structure. |
Pre-treatment of Steel cut wire |
Pre-treatment
of surface, steel board, profile steel, steel structure,
before-painting.
|
We strictly
abide by standard of “SAE J441”,
“JB/T
8354-1996Steel cut wire standard
of machinery
industry of Republic of China to choose material and manufacture. But the length
and specification have little difference due to recycled steel wire.
Steel cut wire
technique specification |
product | Steel cut wire |
Chemical composition |
C | 0.45～0.75% |
Mn | 0.40～1.20% |
Si | 0.10～0.30% |
S | |
P | ＜0.004% | |
Average hardness (measured under 500g load) | 1.0mm：51～53
HRC(525～561HV)
1.5mm：41～45
HRC(388～436HV)
|
Hardness deviation |
The maximum deviation is±1.0HRC or ±40HV | |
Anti-drag intensity | 1.0mm：1750～2150
Mpa
1.5mm：1250～1450
Mpa
|
Microstructure |  
portrait (even deformed perlite) Landscape
orientation
even deformed perlite | |
minimum density (determined alcohol displacement) | 7.8g/cm3 |
products:steel shot、steel grit、Cut wire shot、Stainless cut wire shot
|
| |
| |
|
|
